Adarsh Practice

Lean Six Sigma Green Belt Measure, Analyze & Control Core – MCQs

Questions across 5 chapters of Lean Six Sigma Green Belt Measure, Analyze & Control Core. Pick a chapter, read sample questions with answers, then take a free test. Available in English.

📚 Chapters

✅ Practice questions with answers

  1. The mean of 4, 6, 8, 10, 12 is:

    Basic Statistics & the Normal Distribution

    1. 40
    2. 8
    3. 6
    4. 10
    Show answer

    Answer: B — 8

    40/5.

    How to solve:

    Mean, median, mode; range, variance, standard deviation. Normal: about 68.27% within ±1σ, 95.45% within ±2σ, 99.73% within ±3σ. Z = (X - μ)/σ.

  2. The purpose of measurement system analysis (MSA) is to:

    Measurement System Analysis

    1. determine whether the measurement system produces reliable data
    2. calculate profit
    3. design new products
    4. measure customer satisfaction
    Show answer

    Answer: A — determine whether the measurement system produces reliable data

    MSA first.

    How to solve:

    MSA checks if data can be trusted: accuracy (bias, linearity, stability) and precision (repeatability, reproducibility). Gage R&R (AIAG): <10% good, 10-30% may be acceptable, >30% unacceptable. Number of distinct categories ≥ 5.

  3. Process capability compares:

    Process Capability

    1. defects with time
    2. customer demand with takt
    3. cost with price
    4. process variation with specification limits
    Show answer

    Answer: D — process variation with specification limits

    Voice of process vs voice of customer.

    How to solve:

    Cp = (USL - LSL)/6σ (potential). Cpk = min[(USL - μ)/3σ, (μ - LSL)/3σ] (actual, considers centring). Pp/Ppk use overall (long-term) σ. Cpk 1.33 often minimum; Cpk 2.0 = six sigma short-term.

  4. The main purpose of the Analyze phase is to:

    Analyze Phase: Root Cause & Hypothesis Basics

    1. define scope
    2. celebrate success
    3. identify and verify the root causes (critical Xs) of the problem
    4. implement controls
    Show answer

    Answer: C — identify and verify the root causes (critical Xs) of the problem

    Analyze.

    How to solve:

    H0 = no difference/no effect; Ha = difference exists. If p-value < α (often 0.05), reject H0. Type I error (α) = false alarm; Type II error (β) = missed effect; power = 1 - β. Correlation is not causation.

  5. The main purpose of the Improve phase is to:

    Improve & Control Essentials

    1. collect baseline data
    2. develop, test and implement solutions that address verified root causes
    3. write the charter
    4. validate the measurement system
    Show answer

    Answer: B — develop, test and implement solutions that address verified root causes

    Improve.

    How to solve:

    Improve: generate, select, pilot and implement solutions. Control: SPC, control plan with reaction plan, standard work, mistake-proofing (poka-yoke), training, handover to process owner.

  6. The median of 3, 9, 4, 7, 12 is:

    Basic Statistics & the Normal Distribution

    1. 7
    2. 35
    3. 4
    4. 9
    Show answer

    Answer: A — 7

    Order: 3,4,7,9,12.

    How to solve:

    Mean, median, mode; range, variance, standard deviation. Normal: about 68.27% within ±1σ, 95.45% within ±2σ, 99.73% within ±3σ. Z = (X - μ)/σ.

  7. Repeatability is:

    Measurement System Analysis

    1. difference from the true value
    2. drift over time
    3. variation between different operators
    4. variation when the same operator measures the same part repeatedly with the same gage
    Show answer

    Answer: D — variation when the same operator measures the same part repeatedly with the same gage

    Equipment variation.

    How to solve:

    MSA checks if data can be trusted: accuracy (bias, linearity, stability) and precision (repeatability, reproducibility). Gage R&R (AIAG): <10% good, 10-30% may be acceptable, >30% unacceptable. Number of distinct categories ≥ 5.

  8. Cp is calculated as:

    Process Capability

    1. (USL - μ) / 3σ
    2. 6σ / (USL - LSL)
    3. (USL - LSL) / 6σ
    4. μ / σ
    Show answer

    Answer: C — (USL - LSL) / 6σ

    Cp formula.

    How to solve:

    Cp = (USL - LSL)/6σ (potential). Cpk = min[(USL - μ)/3σ, (μ - LSL)/3σ] (actual, considers centring). Pp/Ppk use overall (long-term) σ. Cpk 1.33 often minimum; Cpk 2.0 = six sigma short-term.

  9. The null hypothesis (H0) usually states that:

    Analyze Phase: Root Cause & Hypothesis Basics

    1. the sample is biased
    2. there is no difference or no effect
    3. there is a difference
    4. the process is improved
    Show answer

    Answer: B — there is no difference or no effect

    H0.

    How to solve:

    H0 = no difference/no effect; Ha = difference exists. If p-value < α (often 0.05), reject H0. Type I error (α) = false alarm; Type II error (β) = missed effect; power = 1 - β. Correlation is not causation.

  10. A pilot is used to:

    Improve & Control Essentials

    1. test a solution on a small scale before full implementation
    2. skip testing
    3. replace data analysis
    4. implement everywhere at once
    Show answer

    Answer: A — test a solution on a small scale before full implementation

    Pilot first.

    How to solve:

    Improve: generate, select, pilot and implement solutions. Control: SPC, control plan with reaction plan, standard work, mistake-proofing (poka-yoke), training, handover to process owner.

💡 How to practise